This power supply is used on all current Tresu DWC units. It converts both 115v and 230v input

voltage to 24v AC.

Classic Tresu Royse Space Saver DWC's use part# 3046106 which is not compatible with our current design.

The level control tube used in the reservoir level control system. This is the genuine TRESU Royse replacement part.

Old part number 1114001401 

Compatibility:

All circulators equipped with auxillary tank.

Genuine TRESU Royse filter bag is a unique design. Not just a bag, the media-filled filter provides optimal filtration over time. The Royse bag is not just an empty bag, it is media filled so that fountain solution deteriorates more slowly between filter changes. This is the OEM original design made to work correctly with the NOVA pump.

Old part number 1181004701

Compatibility:

SS3, SS5, SS10, SS20, SS30, and non riveted cabinet DWC3, DWC5, DWC10, DWC20, DWC30

Don't compromise!

Using only original TRESU Royse replacement parts and consumables assures optimum performance!

Old P/N: 1210000101

This impeller is the genuine TRESU Royse replacement part for your pump. Impellers are color coded. The white color indicates the impeller is for use with 60Hz power. This is the standard impeller mounted in all new NOVA pumps.

Compatibility:

All NOVA PV pumps.

High velocity impeller for use only on 50Hz motor speed. Application for this impeller is limited to where 1210000101 does not provide adequate lift or flow.

Old part number 1210000102 

Compatibility:

All NOVA PV pumps.

Low velocity impeller reduces lift and flow. This impeller can be used when less flow and lift are needed so that foaming is reduced.

Old part number 1210000103 

Compatibility:

All NOVA PV pumps.

Old P/N: 8430187

 

Genuine TRESU Royse DWC air filters protect the DWC's condenser from becoming blocked  by pressroom dust and powder. Cooling efficiency, power consumption and compressor life are directly affected. TRESU Royse filters meet the factory designed specification for air flow and dirt removal.

Compatibility:

Screw assembled cabinet DWC5, DWC10, DWC20, DWC30

Don't compromise!

Using only original TRESU Royse replacement parts and consumables assures optimum performance!

Old P/N: 1119000101

Replacement pump shaft bearing and water diverter mounted just above the impeller housing..

Compatibility:

All NOVA PV pumps.

Conductivity monitoring kit for measuring undissolved particulates in the fountain solution for chemistry regulation. Alarm is activated when pre-set parameters are exceeded informing the press operator to change the fountain solution. Can be added to any Tresu DWC. Assembly plugs into the back panel of the DWC and is controlled by the front panel HMI unit.

In-line probe with titanium electrodes for long life. The unit measures conductivity from 900 to 6000 micro Siemens. The accuracy of the meter and probe is 2% of the full scale reading with a repeatability of 1%. If the sensor is open or the connections are broken, the screen will flash in alarm. Fountain solution conductivity values will vary depending on your printing application and procedures.

Old P/N: 8530103

The NOVA PV pump is a special design providing both supply and return flows from one pump! There is no standard pump that can be substituted for this unit. The NOVA pump special design has just the right balance between supply and return flow to make a stable system. This 230V unit is supplied fitted with a black WAGO plug, and comes with the standard 60Hz. impeller pre-installed. A low velocity impeller is also included.

Compatibility:

DWC10 DWC20 DWC30 230V with black WAGO receptacles.

Old P/N: 1181001101

Replacement shut off valve located at the NOVA PV pump outlet port to prevent back flow after shut down.3/8 thread with 1/2 inch barb on the other side.

Compatibility:

All NOVA PV pumps.

Old P/N: 1181133401

Replacement cap for the auxillary refill tank on all circulators. Includes cap and valve. The hose connects directly to the valve outlet. Color may vary.

Compatibility:

All circulators equipped with auxillary tank.

TRESU Royse has made the entire refrigeration cooling package replaceable. The 5/8 hp 230V cooling package is fitted with a WAGO plug. This is the genuine Royse replacement assembly. It will restore the cooling capability to new. Easy to install yourself with basic mechanical skills.

Compatibility:

DWC10 DWC20 DWC30 230V with black WAGO plug.

Automix II Dosing for two step fountain concentrates. Precise auto mixing of fountain chemistry eliminating the need for hand mixing of chemicals. This unit can be installed on any Tresu DWC.

This unique Tresu design uses a three probe sensor array in the reservoir tank that precisely monitors fountain solution chemistry. Dosing is performed by dual, self-priming, Dosatron premium quality proportional dosing pumps. These use water power technology and are superior in resisting chemical attack making them extremely reliable. Dosing injection rate is preset and tested during production at our Dallas, TX facility and is adjustable based on your specific needs. This unit comes with both user and Dosatron manuals. One year warranty for defects in materials and workmenship.