Wash & Print WB 20 kg 

General Description

TRESU Wash & Print WB Cleaning Detergent has been developed for daily cleaning of anilox rollers in multi-color printing machines. TRESU Wash & Print WB Cleaning Detergent is also suitable for the manual cleaning of printing plates and other machine parts which are contaminated with water-based printing inks.

Instructions for use

Mechanical cleaning: Add undiluted in reservoir of machine. Heating above 40 degrees is not advised and unnecessary. Place contaminated parts in washing machine and start cleaning.
Manual cleaning: Use undiluted in bucket or spray bottle. Apply to surfaces and allow to soak for a few minutes (time depends on degree of contamination). Clean surfaces with clean water.

Dosage

1 liter of TRESU Wash & Print WB Cleaning Detergent to 10 liters of water.

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

BULK PACK - 20% DISCOUNT

Tissue, used for cleaning device at the TRESU Plate cleaning device

BULK PACK - 15% DISCOUNT

Tissue, used for cleaning device at the TRESU Plate cleaning device

Wash & Print UV Special 20 kg

General Description

Suitable for manual and mechanical cleaning of parts and printing plates contaminated with solvent- and/or UV-based inks.

Instructions for use:

Mechanical Cleaning: Add Wash & Print UV Special undiluted in the reservoir of the machine. Heating the cleaner is not advised and unnecessary. Place contaminated parts or printing plates in the washing machine and start the program. (For further instructions, refer to the washing machine user’s manual)

Manual Cleaning: Use Wash & Print UV Special undiluted in a bucket or a spray bottle. Apply it to the surfaces which have to be cleaned. Allow to soak for a few minutes (time depends on the degree of contamination) Rinse the substrate with clean water.

Dosage:

Undiluted.

Hazard statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary statements

P264 Wash thoroughly after handling.
P280 Wear protective gloves / eye protection / face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362 Take off contaminated clothing.
P302+P352

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

Tape for sealing front & back edge of plate to sleeve

This version has significant better performance compared with Tresu discontinued item:
Tape Green, PN: 3038506
It leaves no fragments from glue when remounting plates.

Further this tape version is more flexible to ensure improved sealing of plate to sleeve. 

Wash & Print Anilox 1 kg

General Description

Wash & Print Anilox has been developed for the periodic manual cleaning of anilox rollers contaminated with water solvent- and UV-based inks. For this type of cleaning, it is not necessary to dismount anilox rollers from their printing machines.

Instructions for use

Manual Cleaning: Apply Wash & Print Anilox on the anilox roller with a spray bottle. Then apply a quantity of Wash & Print Anilox on the supplied sponge and rub the surface that has to be cleaned. Rinse the sponge with water. Rinse the anilox roller with plenty of water using a rinse-program (by printing machine) or with a wet cloth. Wipe the anilox roller dry with a clean cloth or tissue.
N.B.: If the anilox roller is severely contaminated, it may be necessary to repeat this process
Do not allow this product to dry out. The contaminants that had been soaked loose could then re-harden on the surface of the roller.

Dosage:

Ready to use.

Hazard statements

H319 Causes serious eye irritation.

Precautionary statements

P264 Wash thoroughly after handling.
P280 Wear eye protection / face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

Wash & Print Floor 5 kg

General Description

Wash & Print Floor has been developed for general cleaning of floors with a scrubbing machine and is applicable on a wide variety of industrial floors and is suitable to remove most water-based inks.

Instructions for use

Scrubbing machine: Add Wash & Print Floor diluted with water (general advise 1:30) in the reservoir of the cleaning machine. Use the scrubber machine according to the instructions in the user manual

Manual Cleaning: Dilute Wash & Print Floor with water (general advise 1:30) in a bucket. Apply it on the floor with a mop. If necessary, allow to soak for a few minutes. Use a mop with clean water to remove residue

Dosage:

Diluted with water from 1:10 up to 1:50.

C10 Alcoholethoxylaat sodium hydroxide.

Hazard statements

H314 Causes severe skin burns and eye damage.

Precautionary statements

P264 Wash thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

Wash & Print UV Special 1 kg

General Description

Suitable for manual and mechanical cleaning of parts and printing plates contaminated with
solvent- and/or UV-based inks.

Instructions for use:

Manual cleaning: Use undiluted in a spray bottle. Apply to surfaces and allow to
soak for a few minutes (time depends on the degree of contamination). Clean surfaces with
clean water and dry cloth. 

Dosage:

Ready to use.

Hazard statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary statements

P264 Wash thoroughly after handling.
P280 Wear protective gloves / eye protection / face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362 Take off contaminated clothing.
P302+P352 IF ON SKIN: Wash with plenty of water

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

Wash & Print WB 1 kg

General Description

TRESU Wash & Print WB Cleaning Detergent has been developed for daily cleaning of anilox rollers in multi-color printing machines. TRESU Wash & Print WB Cleaning Detergent is also
suitable for the manual cleaning of printing plates and other machine parts which are contaminated with water-based printing inks.

Instructions for use

Use undiluted in spray bottle. Apply to surfaces and allow to soak for a few minutes (time depends on the degree of contamination). Clean surfaces with clean water.

Dosage:

Ready to use.

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

Wash & Print Solvent 20 kg

General Description

Wash & Print Solvent is suitable for manual and inline cleaning of anilox rollers, printing plates and (machine) parts contaminated with solvent-based inks. Wash & Print Solvent is a safe alternative for standard solvents like ethylacetate, ethanol, acetone and MEK.

Instructions for use

Inline Circulation Cleaning: Use Wash & Print Solvent undiluted in a bucket. Heating the cleaner is not advised and unnecessary. Start the cleaning process by turning on the ink supply-pump.  When the system is clean, turn off the pump (time depends on the degree of contamination) Remove excessive product with a dry cloth

Manual Cleaning: Use Wash & Print Solvent undiluted in a bucket or a spray bottle.
Apply it to the surfaces which have to be cleaned. Allow to soak for a few minutes (time depends on the degree of contamination). Use a dry cloth to remove the contaminants or rinse the substrate with clean water.

Dosage

Undiluted.

Storage / Shelf life

Shelf life is 1 year after production date. Production date is on the label as part of the batchnummer (6 digits for the date and last 2 digits for the production row on that date).

Wash & Print Sponge

General Description

Reusable Melamine sponge can use it 3-4 times, or even longer. 
Sponge can be used for all products in our product portfolio, especially recommended for the anilox cleaner. A special microfiber sponge designed to optimize the cleaning of anilox rolls. Not only is the cleaning pad customized to slightly penetrate the cell, it is also less absorbent than a typical sponge.

This lets the leave the cleaning pad during the wiping application, utilizing in a much more efficient manner than a rag or shop towel.

Optimizes the cleaning action of on anilox rollers

Designed to slightly penetrate into the cell as well as help evenly distribute over the entire surface of the roller while minimizing the amount of needed to clean the anilox roller

Instructions for use

Use one side of the sponge to rub in and spread the product after it have soaked for a minute or two. Then use the other side of the sponge to soak up the rest of the product before cleaning the material with water. 

Remember to rinse the sponge after use, before reusing it. Do not twist the sponge but squeeze it to avoid tear the sponge.

Original TRESU End Seal D1 EPDM - Black, dimensions 23 x 72 mm 
   
 

TRESU End seals are available for all kinds of TRESU chamber profiles. By the large number of different materials and sizes, TRESU End Seals are suitable for all kinds of applications of the printing industry.
TRESU patent Perfect sealing Easy cleaning Fast seal change Different materials Reduced waste